ALPRES-07® is an integral system for gas pressure monitoring and control.
Features
• Monitors pressure of any type of gas in real time.
• Measures the pressure line with alarms in case of high or low pressure in relation to preset limits, or the activation of one or two pressostats.
• Minimum and maximum values are preset, as defined by the user.
• When pressure exceeds the preset ranges a visual and sound alarm sets off.
• Monitors the status of the pressostats.
• 8-digit alphanumeric LCD.
• 4-key polycarbonate board.
• Apt for outdoor use.
• Easy installation, use and setting up.
Optionals
• Remote visual alarm.
• Alpres-M TCP / IP concentrator with web access, to monitor and preset remotely up to 7 alarms through a web browser.
• External sensor for pressure values over 10 Bar.
• Back-up battery.
• Power supply.
Technical Specifications
• Internal pressure sensor from 0 to 10 Bar.
• 2 inputs for NO switches (pressostats).
• Vacuum sensor from 0 to -999 Mbar +/- 3%.
• 24Vdc power supply.
• Cabinet complies with IP65 standard.
• Displays pressure in 4 digits.
• Temperature range -25º / 55ª.
BROCHURE
ALPRES M
ALPRESM® is an interface that exhibits the general state of the ALPRES-07® monitors that are connected to your net. In case abnormal status is detected, a visual and sound alarm sets off.
Features
• Ready to connect 1 to 7 ALPRES®.
• Sound and visual alarm sets off when:
o One or several ALPRES® are disconnected.
o Preset values are exceeded.
• LCD display with backlight.
• Remote monitoring of status of ALPRES® from the web page.
• Password to protect webpage data.
• IP address set up through DHCP.
• Information protected against power failure.
More Information
ALPRES (Discontinued)
Monitoring and control of gas supply. An alarm goes off if preset pressure thresholds (low and high) are crossed.
BROCHURE
